Temporary Fencing – Half Size Panel – 1745mm pre-galvanised steel mesh

APPLICATIONS AND USAGE:

• Closing a Gap at the End of a Fencing Run

On most construction and civil engineering sites, the perimeter does not divide into exact multiples of 3450mm. When a standard panel run ends short of a boundary, the remaining gap is often too narrow for another full panel and too wide to leave open. This 1745mm panel is designed for that situation. It connects into the existing run using standard couplers and feet, closing the gap without cutting, modifying or compromising the panel structure.

• Working Around Gates and Access Points

A pedestrian gate or vehicle gate installed within a fencing run rarely aligns exactly to full panel spacing on both sides. The section of fencing adjacent to a gate post often needs to be shorter to close the run up to the gate frame. The half-size panel is commonly used in this configuration, positioned directly against a gate or access structure to maintain a continuous perimeter up to the access point.

• Tight Site Boundaries and Structural Abutments

On confined urban sites, the fencing run often has to terminate at a wall, hoarding line, kerb edge or existing structure. A full 3450mm panel will either overrun the boundary or leave an exposed section. A 1745mm panel allows the end of the run to be positioned accurately against the abutment.

• Hire Stock Completion

Hire companies maintaining temporary fencing stock benefit from carrying a proportion of half-size panels to complete orders without requiring additional site deliveries. Including a small number of half-size panels in a standard hire kit reduces on-site problem-solving and allows the fencing run to be completed in a single visit.

COMPATIBILITY AND ACCESSORIES:

- Compatible Panels

This panel shares the round top profile and connection points of the Securasite standard round top temporary fence panel (TF-30-RT-001-PGA) and connects into the same run using standard fence couplers. Compatibility with third-party temporary fencing systems that use a standard coupler connection should be confirmed before ordering.

- Required Accessories:

Fence feet: A minimum of two feet per panel is needed. Available options from Securasite:

• Standard thermoplastic fence feet (AC-TF-FT-01), 14kg
• Hi-visibility thermoplastic fence feet (AC-TF-FT-YEL), 20k

Fence couplers: Standard fence couplers (AC-TF-CS-01) are required to connect this panel to adjacent panels in the run. Two couplers are typically needed per join.

- Optional Accessories:

• Fence ballast solo block (AC-PB-BB-DB): adds downforce for increased stability on exposed or windy sites.
• Pre-filled fence ballast bag (AC-PSBPF15): 15kg pre-filled alternative for sites where loose ballast placement is impractical.
• Anti-lift hook (SS-TF-ALH-001): prevents panels being lifted from the feet in high-traffic or public-facing areas.
• Lockable fence couplers (AC-TF-CSD-02): for installations where tamper resistance is required.
• Fence sheeting: debris netting, monorflex rolls or acoustic panels can be attached to the mesh infill for containment, noise reduction or site privacy. Contact Securasite to confirm the attachment method for this panel width.
• Fence stabilisers (SS-TF-FS-001 or SS-TF-FS-003): for additional lateral bracing where required.

- Storage:

Securasite standard fence stillages (ST-30-TF-001) and HD universal stillages (ST-30-TF-002) are specified for the 3450mm full-width panel range. Storage compatibility of half-size panels in these stillages should be confirmed with the Securasite sales team before ordering.