Blue Walkthrough Barrier Fixed Leg
Use this blue walkthrough barrier to put a controlled pedestrian crossing into barrier lines around water mains, utility trenches and ground works. The frame is 2300mm long and 2100mm high, sits on fixed legs and hooks into the neighbouring barriers through hook and eye connectors, so the works area stays enclosed on both sides of the opening.
Blue is often used to identify water, utility and subterranean works, and on larger civil engineering sites it helps separate one contractor's zone from another. Built in the West Midlands from fully welded pre-galvanised steel tube, the frame is finished in high gloss blue powder coat, with autonomous robot welding and qualified welders producing the range.
Key Features
- Open walkthrough opening: lets operatives and the public cross a works line at one point, with no gate hardware to maintain.
- 2.1m frame height: sits well above 1100mm barriers, so the crossing stands out along long linear works such as pipe and cable routes.
- One-piece fixed leg frame: welded legs give a firm stance and save time on sites that move barrier lines as works progress.
- Hook and eye connectors: hooks into our HD Blue Pedestrian Barrier and Hybrid Pedestrian Barrier runs.
- Blue powder coat over galvanised tube: two layers of protection for frames that spend time near water, mud and wet ground.
- Zone colour options: the same frame comes in red, yellow, green, orange, black and Bespoke RAL.
What You Receive
- Supplied: 1 blue walkthrough barrier with integral fixed legs
- Dimensions: 2300mm length, 2100mm height, 460mm foot width
- Weight: 12kg
- Finish: high gloss blue powder coat over pre-galvanised steel
- Not included: run barriers, gate, trench covers, signage or ballast





































































