Securasite Spanguard Expanding Barrier

Frequently Asked Questions

Q: What is an expanding crowd control barrier?
A: The Spanguard is a wheeled expanding concertina barrier, also referred to as a folding barrier or extendable barrier, for temporary access control and pedestrian management. The seven-section frame extends from a compact stored position to either 2.1m or 4.0m depending on the model, then locks in place using the integrated end mechanisms. Wheel brakes hold it in position without ground fixing. When the zone changes, the whole unit collapses and rolls to the next location.

Q: What is the difference between the 1.3m and 1.8m height options?
A: The 1.3m model is suited to indoor facilities, transit environments and general pedestrian management where a visual deterrent at standard barrier height is sufficient. The 1.8m model is the right choice for outdoor sites, carriageway-adjacent works and applications where a more substantial physical presence is needed above pedestrian head height. If the barrier will be adjacent to a vehicle route or deployed in an open outdoor environment, choose the 1.8m model. If you are unsure, contact our team on 0330 056 4420 before ordering.

Q: What is the difference between the 2.1m and 4.0m length models?
A: The 2.1m model covers a standard path width, doorway or single access point and stores compactly at a closed width of approximately 475mm to 485mm depending on height. The 4.0m model covers a wider access point, loading bay or dual-lane route in a single unit, with a closed width of 830mm. For coverage beyond 4.0m, multiple units connect end to end. If you need to cover a 6m to 8m opening, two 4.0m units are more efficient than three or four 2.1m units.

Q: Can one person set up this barrier without assistance?
A: Yes. The barrier extends from its collapsed position, locks in place using the integrated end mechanisms and stays fixed with the wheel brakes engaged, all without tools or additional operatives. One person can deploy, reposition and retract the barrier as zone requirements change during a shift.

Q: Can multiple Spanguard barriers be connected together for longer runs?
A: Yes. Multiple units link end to end for extended perimeter coverage. For project quantities or multiple-unit orders, contact our team on 0330 056 4420 to discuss delivery planning and quantities before ordering.

Q: Is this barrier suitable for outdoor use and typical UK weather conditions?
A: Yes. The powder-coated 6063-T5 aluminium frame is confirmed for outdoor use. The one-piece-bended tubular construction supports wind resistance under normal site conditions. For exposed sites such as elevated motorway works or coastal locations, confirm with your site risk assessment whether additional securing is needed beyond the integrated wheel brakes.

Q: What is the difference between this barrier and a standard fixed-leg crowd control barrier?
A: A standard fixed-leg crowd control barrier is designed for high-volume perimeter runs of many units deployed in a continuous line. It is the right choice for construction site perimeters, event crowd management at scale and any situation where many barriers are being deployed at once. The Spanguard is designed for single-point, rapid, repositionable access control by one operative. It deploys in under a minute, moves on wheels and stores compactly. The two products address different operational needs and are often used on the same site for different purposes.